مشخصات

• سایر توضیحات
  ・Power on/off ・Laser switch:Press and hold to turn on the laser, release to turn off the laser ・Left-keys:Hold it down for two seconds. - Up ・Right-keys: Hold it down for two seconds. - Next ・OK-keys:Hold down for 2 seconds -Play/Pauseto ・Vol+:Click - Volume + ・Vol-:Click - Volume - ・Home/Back key:Click the back button (right-click the development mouse and close the back button)Long press the homepage function for 2 seconds ・Menu:Long press 2 seconds black screen function (can only be achieved in PPT full-screen mode) ・USB receiver is defined as a standard HID device, plug and play, receiving transmitter signals and data, supporting Windows, Android and iOS systems. ・Remote control default 2.4G mode, factory has been paired, plug and play. In 2.4G mode, press any key and the red light flashes. ・Press the OK+HOME button for 3 seconds, the red light will flash quickly and then the red light will flash slowly to enter the pairing mode, and the red light will turn off after the USB is plugged in. Matching success ・Speed up of cursor pointer: press "OK" and "Vol+" at the same time, and the LED flash for about 1 second, indicating that the cursor pointer speed increases one level; ・The cursor pointer speed slows down: press "OK" and "Vol-" at the same time, and the LED light will flash for about 1 second, indicating that the cursor pointer speed slows down one level; The changes of voltage and temperature may make the cursor drifts . In this case, put the mouse flat on the desk and remain still. 'tbu can complete calibration by pressing any key to wake it up when it is in hibernation mode. ・Place on the desktop or a flat surface after power-on; ・The static calibration is completed until the LED changes from flashing to flash. ・Note: Static calibration compensation is required only when the cursor drifts. Calibration is not required by default. ・Enter the infrared learning mode: long press the power button for 3 seconds until the LED light flashes quickly and then release it. When the LED light is on for 1 second, it enters the slow blinking. ・Aim the infrared head of an infrared remote control at the infrared head of the flying squirrel, press the key to be learned, and the LED of the flying squirrel will flash for 3 seconds and then recover the slow flash, indicating that the infrared code value sent by the TV remote control is captured ・Note: Only the power button can be learned. If the button has infrared code value, send infrared code value; if there is no infrared code value, send 2.4G code value.
• نوع باتری
  لیتیوم پلیمر (Li-Po)
• جنس بدنه
  پلاستیک ABS
• نوع ریموت کنترل
  هوشمند